Dummy Boards
Dummy Boards
Dimensions;
1.25" wide x 1.50" long x .875" high
The Dummy Board is designed for use in rolling stock and non-powered dummy units. The Dummy Board is a Command Control upgrade without a motor driver circuit. It is assigned an Engine ID number and can be used to control directional lighting, front and rear coil couplers, smoke unit/strobe light on/off and Railsounds 4.0. The tiny size of the Dummy Board allows you to install it in virtually anything!
The Dummy Board can be used in conjunction with an 8 or 15 Amp Driver, where the Driver installs into a powered A unit to control the motors, front light and front coupler. The Dummy Board installs into the dummy A unit and controls the rear light and rear coupler. This is great because it eliminates any tether that would ordinarilly be required. Especially for Old US Hobbies F-3's where there is not enough room in the powered A unit to add Railsounds. The Dummy Board can control the Railsounds from the dummy A unit as well. There are several uses for a Dummy Board if you just put your imagination to work.
Each Dummy Board features;
Constant voltage directional lighting (12 VAC)
Smoke unit/strobe light on/off control
Front and rear coil coupler control (couplers sold separately)
Railsounds 4.0 serial lead (for controlling Railsounds 4.0 features)
All necessary installation hardware (i.e. double sided tape, antenna and program/run switch with hardware)
Comprehensive detailed installation instructions
O Scale Dummy Boards
Item # Description Price TAS-1099 Dummy Board $59.95
Railsounds 4.0 for 8 & 15 Amp Drivers
Dimensions;
1 1/4" wide x 4 1/2" long x 1" tall
The Scale Command Railsounds upgrade kit is can be used in conjunction with a Scale Command Dummy Board. The Railsounds upgrade kit simply connects to the Dummy Board with three wires. Each Scale Command Railsounds upgrade kit features;
Wide selection of sounds to choose from
Easy installation with either an 8 or 15 Amp Driver or a Dummy Board
Complete easy-to-follow installation manual
Compact size makes it ideal for tight spaces
Diesel sounds include a VCO for automatic revving up and down
Steam sounds include a reed switch for chuff control
Each kit includes a 2" diameter speaker & all necessary mounting hardware
For a complete list of Railsounds 4.0 features and how to activate them using the Cab-1 Remote, click here
| Railsounds 4.0 Upgrade Kit Prices | ||
| Item # | Description | Price |
| TAS-5124 | Scale Command RS 4.0 Upgrade w/ Mid Steam sounds (4-6-4, 4-6-2, etc.) |
$114.95 |
| TAS-5130 | Scale Command RS 4.0 Upgrade w/ Large Steam sounds (4-8-4, 2-8-4, 2-10-2, etc.) |
$114.95 |
| TAS-5136 | Scale Command RS 4.0 Upgrade w/ Articulated sounds (4-6-6-4, 2-6-6-6, 4-8-8-4, etc) |
$114.95 |
| TAS-5142 | Scale Command RS 4.0 Upgrade w/ SP Daylight sounds (GS-2, GS-4 Daylight specific) |
$114.95 |
| TAS-5152 | Scale Command RS 4.0 Upgrade with EMD I sounds (GP-9, GP-7, GP-38, GP-30, etc) |
$114.95 |
| TAS-5158 | Scale Command RS 4.0 Upgrade w/ EMD II sounds (F-3, F-7, etc) |
$114.95 |
| TAS-5164 | Scale Command RS 4.0 Upgrade w/ EMD III sounds (E-7, E-8, etc) |
$114.95 |
| TAS-5170 | Scale Command RS 4.0 Upgrade w/ Alco sounds (PA-1, FA-2, RS-3, RSD-4/5, etc.) |
$114.95 |
| TAS-5176 | Scale Command RS 4.0 Upgrade w/ GE sounds (Dash-9, SD-40, SD-50, Dash-8, etc.) |
$114.95 |
| TAS-5188 | Scale Command RS 4.0 Upgrade w/ Electric sounds (GG-1, EP-5, E-60, etc.) |
$114.95 |