Scale Command upgrades without Railsounds 4.0
Scale Command DC Driver
Dimensions; 1 1/4" wide x 4" long x 1 1/4" tall.
The DC Driver and Railsounds upgrade can be used together to add 2-rail TMCC and Railsounds 4.0 to locomotives that the Scale Command SAW board will not fit into. Or, it can be used as a stand alone receiver for locomotives without sounds. The DC Driver is also great for Turntables!
Each Scale Command DC Driver is rated at 8 Amps. 15 Amp drivers are available for locomotives that use up to 8 motors. Each Scale Command DC Driver upgrade kit features;
Directional lighting (Constant Voltage!)
Smoke unit, strobe light or Mars light control (on and off from the Cab-1)
Precision motor control of up to 2 motors with an 8 amp (up to 6 motors with a 15 Amp) (32 speed steps)
Accepts engine addresses from 1-99.
Railsounds 4.0 adaptable (A Scale Command Railsounds motherboard is required)
Complete installation kit including detailed installation instructions,all hardware and antenna
Command receiver (R2LC)
Plug in style wire harnesses for all connections (some installations will require soldering)
Steam upgrades will also require a wire tether to run between the locomotive and tender. A complete list of wire tethers can found by clicking here; Optional Components
The Scale Command DC Driver is a stand alone 2-rail TMCC receiver. The DC Driver can be used for locomotives that have limited space, or locomotives that you decide do not need sounds. Every Scale Command DC Driver can be upgraded to include Railsounds 4.0. The Railsounds upgrade kits that can be used with a DC Driver are shown below;
Scale Command Railsounds Upgrade (for DC Drivers & Dummy Boards)
Dimensions; 1 1/4" wide x 4 1/2" long x 1" tall
The Scale Command Railsounds upgrade kit is designed to be used in conjunction with a Scale Command DC Driver. The Railsounds upgrade kit simply connects to the DC driver using a wire harness with 2 plugs. Each Scale Command Railsounds upgrade kit features;
Wide selection of Railsounds sound sets
Easy "Plug and Play" installation
Complete installation kit including 2.5" diameter speaker and all hardware
Steam sound upgrades include a reed switch for chuff control, based on wheel revolution
Diesel upgrades include a built in "Rev Generator" to control engine RPM's
Complete easy-to-follow installation manual
Scale Command Railsounds 4.0 upgrades are designed to be used in conjunction with a Scale Command DC Driver.
Clicking on the links below will enable you to hear a sample of the respective sounds.
Scale Command DC Driver Price List |
||
| TAS Item # | Description |
Price |
| TAS-7100 | Scale Command DC Driver 8Amp | $99.95 |
| TAS-7108 | Scale Command DC Driver 15 Amp | $130.95 |
Scale Command Railsounds 4.0 Upgrade Kit Price List |
||
| TAS Item # | Description |
Price |
| TAS-7124 | Scale Command RS 4.0 Upgrade w/ Mid Steam sounds (4-6-4, 4-6-2, etc.) |
$99.95 |
| TAS-7130 | Scale Command RS 4.0 Upgrade w/ Large Steam sounds (4-8-4, 2-8-4, 2-10-2, etc.) |
$99.95 |
| TAS-7136 | Scale Command RS 4.0 Upgrade w/ Articulated sounds (4-6-6-4, 2-6-6-6, 4-8-8-4, etc) |
$99.95 |
| TAS-7142 | Scale Command RS 4.0 Upgrade w/ SP Daylight sounds (GS-2, GS-4 Daylight specific) |
$99.95 |
| TAS-7148 | Scale Command RS 4.0 Upgrade w/ Small Steam sounds (2-8-0, 2-6-0, 0-8-0, etc) |
$99.95 |
| TAS-7196 | Scale Command RS 4.0 Upgrade with N&W J sounds (N&W J specific sounds) |
$99.95 |
| TAS-7152 | Scale Command RS 4.0 Upgrade with EMD I sounds (GP-9, GP-7, GP-38, GP-30, etc) |
$99.95 |
| TAS-7158 | Scale Command RS 4.0 Upgrade w/ EMD II sounds (F-3, F-7, etc) |
$99.95 |
| TAS-7164 | Scale Command RS 4.0 Upgrade w/ EMD III sounds (E-7, E-8, etc) |
$99.95 |
| TAS-7170 | Scale Command RS 4.0 Upgrade w/ Alco sounds (PA-1, FA-2, RS-3, RSD-4/5, etc.) |
$99.95 |
| TAS-7176 | Scale Command RS 4.0 Upgrade w/ GE sounds (Dash-9, SD-40, SD-50, Dash-8, etc.) |
$99.95 |
| TAS-7188 | Scale Command RS 4.0 Upgrade w/ Electric sounds (GG-1, EP-5, E-60, etc.) |
$99.95 |