Constant Voltage Lighting Upgrades that Add Interest & Excitement to Your Locomotives and Rolling Stock!
Our complete line of constant voltage lighting upgrades are designed to be very simple to install and add a whole new dimension to look and flavor of your railroad equipment. All of our upgrades work with both AC and DC power (from 5-22 Volts) and are completely compatible with all Operating systems (i.e. TMCC, DCC, DCS, etc). Our upgrades make use of LED's which do not produce heat and have a high life expectancy. We also use small grain of wheat bulbs which are regulated below their maximum ratings to ensure a long life as well. You won't be disappointed! Our products are of the highest quality and sure to add fun and excitement to railraod now and into the future.
There are a lot of great photos pictured here, please be patient while they download!
| Item # & Description | Photo |
Price |
| TAS-1059 TMCC Alternating Flashing Ditch Lights. These incandescent bulbs install on the pilot of your modern diesel and are both illuminated when the engine is moving. When the horn is blown the ditch lights oscillate back and forth just like the prototypes! (Designed specifically for locos equipped with Lionel TMCC) |
 |
$34.95 |
| TAS-1050 Flat Top Strobe Light. This LED installs on the cab of your diesel locomotive and flashes on and off. The real railroads used these strobes to keep wildlife off the track and as a warning device to humans. The LED generates no heat and is safe for use on all plastics. |
 |
$19.95 |
| TAS-1060 High Intensity Light.(Single Bulb) These are the brightest lights available on the market today. They are Ultra High Intensity LED's that generate the same type of light you see on new cars on the highway. They have an intense whitish blue glow and will easily cast a shadow on a wall 15 feet away! The average life on these bulbs is 11 YEARS! Just think, you'll never have to change a bulb again! |
|
$29.95 |
| TAS-1062 Same as above, but with 2 bulbs |
$36.95 | |
| TAS-1064 Same as above, but with 4 bulbs |
 |
$46.95 |
| TAS-1030 Caboose/ Pullman Lantern This kit comes with 2 scale lanterns that mount to sides of your caboose, Pullman Car or bunk car and has 2 small bulbs that fit inside them. The effect is spectacular! You have to try a pair of these to believe the realism! |
|
$26.95 |
| TAS-1042 Flashing Rear End Device.(yellow) This kit includes a small End of Train Device that mounts into the coupler on your freight car. It has a small LED that flashes just like the prototype. The small circuit board fits into the car that the ETD mounts to. There are several roller types available for different trucks, please see the chart below for your specific needs. |
 |
$19.95 w/o rollers |
| TAS-1040 Flashing Rear End Device (Red) |
$19.95 w/o rollers |
|
| TAS-1048 | Pickup Roller for MTH Die Cast Trucks (all) | $5.95 |
| Roller Classification | Fits the Following Trucks |
|
| C | MTH
Premier & Railking Die Cast Sprung Trucks Comes with pickup roller & ground strap |
|
| TAS-1054 Marker Lights Red This kit contains 2 small red LED marker lights that fit into the rear of passenger diesels or the ends of streamlined Pullman cars. The LED's do not generate heat and are safe with all materials. |
|
$19.95 |
| TAS-1032 Caboose Flasher Yellow This kit contains one small yellow flasher in a housing that mounts to the bottom of a caboose roof. It flashes on and off much like the FRED-1000. This is a great little addition to any caboose! |
Same
as below, but |
$19.95 |
| TAS-1034 Same as above, but with a red flasher |
 |
$19.95 |
| TAS-1038 Constant Voltage Ditch Lights These small lights come in their own housing that mounts to the pilots on diesels. The 2 lamps are on all the time and do not flash. A low cost alternative to the AFDL-2000. |
|
$26.95 |
TAStudios 970 Windham Ct. Suite 8, Boardman, OH 44512
Phone:(330) 533-7181 Fax:(330) 533-7208