
Command
Ready Components
If
you own a Lionel Command Ready locomotive then we have the parts you'll
need to upgrade the engine to TMCC with Railsounds 4.0 and electronic
coil couplers. The parts shown below are only applicable to "Command
Ready" locomotives shipped by either Lionel or K-Line. If you
have any questions, please contact us.
Coil
Couplers.
If you would like to uprade yor couplers to electronic coil couplers
please see the chart bnelow. Please advise the locomotive you are
upgrading when you call in your order so we can ensure you receive
the proper coupler(s). The photo below illustrates what a coil coupler
looks like;

Coil
Coupler Pricing |
| TAS-1100 |
T-Bar Style Coil
Coupler 1 5/8" long (replaces 2" long couplers) |
$12.00 each |
| TAS-1106 |
SD40/50/50 Coil
Coupler (mounts with a pal nut) |
$12.00 each |
| TAS-1104 |
Short T-Bar Coupler |
$12.00 each |
| TAS-1108 |
Die-Cast 4-wheel
truck with coil coupler (for steam locos only) |
$30.00 each |
R2LC
Command Receiver Board The R2LC is designed for Command
Ready Locomotives released by both Lionel and K-Line. Lionel's part
number is 6-22960. All
R2LC's have the code designation of C08. If you are upgrading a Lionel
C-420 Command Ready Locomotive, please request a C07 board, as the
C08 board will require you to swap the wires on the headlight leads.

Command
Ready R2LC Pricing |
| TAS-1066 |
R2LC (C08 Code)
(Lionel part # 6-22960) |
$39.95 |
Railsounds
4.0 for Command Ready Locomotives
These Railsounds kits are available in several different sound options.
These boards are only for use in Command Ready locomotives and will
NOT work as stand alone units. They must be plugged into a motherboard
to operate properly. Lionel's part number for the diesel sounds is
6-22964 and steam kits are 6-22963.
If you are unsure of your specific application please contact
us.

Click
on the links below to hear samples of the sounds